RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
09951-04020
09952-04010
09954-04010
09955-04051
09958-04011
NOTICE:
*
Set the claws of SST onto the rear suspension member sub-assembly securely as shown in the illustration.
*
Be careful as the rear suspension member rear body mounting cushion may fly out.
*
The rear suspension member rear body mounting cushion cannot be reused.
(d) Remove SST and the rear suspension member rear body mounting cushion LH from the rear suspension member sub-assembly.
63. REMOVE REAR SUSPENSION MEMBER REAR BODY MOUNT CUSHION RH
HINT
Perform the same procedure as the LH side.
64. REMOVE BOLT (for 2WD)
(a) Remove the 2 bolts from the rear suspension member sub-assembly as shown in the illustration.
65. REMOVE HOLE PLUG
(a) Remove the 12 hole plugs from the rear suspension member sub-assembly as shown in the illustration.