RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
Before using SST, apply grease to the SST bolts.
HINT
Use SST with the "F" mark facing the rear suspension member front body mounting cushion.
(c) Using SST, install the rear suspension member front body mounting cushion (LH side) until there is no clearance between the rear suspension
member sub-assembly and the rear suspension member front body mounting cushion (LH side).
SST : 09527-17011
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
If the rear suspension member sub-assembly is scratched, apply paint to the scratched areas of the rear suspension member
sub-assembly.
(d) Remove SST from the rear suspension member sub-assembly.
4. INSTALL REAR SUSPENSION MEMBER FRONT BODY MOUNTING CUSHION (for RH Side)
(a) Temporarily install the rear suspension member front body mounting cushion (RH side) while confirming the installation direction.
Standard (A):
45° +/- 5°
(b) Install SST as shown in the illustration.