RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Ride Height Sensor: Testing and Inspection
Height Control Sensor (for Front Side)
SUSPENSION CONTROL: HEIGHT CONTROL SENSOR (for Front Side): INSPECTION
1. INSPECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY
(a) Check the front height control sensor:
(1) Connect 3 dry batteries of 1.5 V in series.
Text in Illustration
(2) Connect a positive (+) lead from the battery to terminal 3 (SHB) of the height control sensor and a negative (-) lead to terminal 1 (SHG).
While applying 4.5 V, slowly moving the sensor's link up and down, and measure the voltage between terminal 2 (SHFR*2 or SHFL*3)
and terminal 1 (SHG).
HINT
*
*2: for RH
*
*3: for LH
Standard Voltage:
for RH
for LH
NOTICE:
*
Do not apply more than 6 V.
*
Do not drop the height control sensor. If the sensor is dropped, replace it with a new one.
If the value is not as specified, replace the front height control sensor sub-assembly.