RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(b) Disconnect the connector.
Installation
SUSPENSION CONTROL: HEIGHT CONTROL SWITCH (for Luggage Compartment): INSTALLATION
1. INSTALL HEIGHT CONTROL SWITCH
(a) Connect the connector.
(b) Engage the 2 claws to install the height control switch to the deck trim side panel assembly RH.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
4. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
5. INSPECT SUSPENSION CONTROL SYSTEM
(a) Inspect the suspension control system See: Suspension Control ( Automatic - Electronic )/Testing and Inspection/Scan Tool Testing and
Procedures/Test Mode Procedure.