RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
4. REMOVE REAR SPRING SET PLATE
(a) Remove the rear spring set plate from the rear No. 2 suspension arm assembly.
5. REMOVE HEIGHT CONTROL PLUG
(a) Remove the height control plug from the rear pneumatic cylinder assembly.
6. REMOVE REAR PNEUMATIC CYLINDER COVER
(a) Remove the 4 clips and bracket cover from the pneumatic chamber bracket.
(b) Using a wooden block, hold the pneumatic chamber bracket between aluminium plates in a vise as shown in the illustration.
Text in Illustration
(c) Remove the 3 nuts and pneumatic chamber bracket from the rear pneumatic cylinder.
(d) Using a screwdriver, release the clamp lock of the 2 rear height control cover bands to remove them as shown in the illustration.
(e) Remove the rear pneumatic cylinder cover from the rear pneumatic cylinder.