RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(a) Disengage the 2 claws to remove the height control OFF switch from the No. 1 instrument panel under cover sub-assembly.
Installation
SUSPENSION CONTROL: HEIGHT CONTROL OFF SWITCH: INSTALLATION
1. INSTALL HEIGHT CONTROL OFF SWITCH
(a) Engage the 2 claws to install the height control OFF switch to the No. 1 instrument panel under cover sub-assembly.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
5. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
6. INSPECT SUSPENSION CONTROL SYSTEM
(a) Inspect the suspension control system See: Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure.