RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
NOTICE:
Make sure that the claws on the hooks are securely engaged to the spring.
(b) Install the bolt and nut to the front shock absorber as shown in the illustration and secure the front shock absorber in a vise.
A:
28 mm (1.10 in.)
8. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
(a) Using SST, compress the front coil spring.
SST : 09727-00050
SST : 09727-30021
09727-00010
09727-00031
NOTICE:
Do not use an impact wrench. It will damage SST.
HINT
If the front coil spring is compressed at an angle, using 2 SST will make the work easier.
(b) Check that the front coil spring is fully compressed.
(c) Remove the front support to front shock absorber nut.
9. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY
10. REMOVE FRONT SUSPENSION SUPPORT BEARING
11. REMOVE FRONT COIL SPRING UPPER SEAT
12. REMOVE FRONT COIL SPRING UPPER INSULATOR
13. REMOVE FRONT COIL SPRING