RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Text in Illustration
6. SEPARATE FRONT SPEED SENSOR See: Front Shock Absorber/Removal
7. SEPARATE FRONT STABILIZER LINK ASSEMBLY See: Front Shock Absorber/Removal
8. REMOVE FRONT PNEUMATIC WITH SHOCK ABSORBER CYLINDER ASSEMBLY
(a) Support the front axle using a jack and wooden block.
Text in Illustration
(b) Loosen the 2 bolts, remove the 2 nuts and separate the front pneumatic with shock absorber cylinder assembly (lower side) from the steering
knuckle.
NOTICE:
*
When removing the nuts, keep the bolts from rotating.
*
Do not remove the 2 bolts.
(c) Remove the height control clamp from the front pneumatic with shock absorber cylinder assembly.
(d) Slowly lower the jack, and remove the 3 nuts (upper side), 2 bolts (lower side) and front pneumatic with shock absorber cylinder assembly.