RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Torque : 85 Nm (867 kgf-cm, 63 ft-lbf)
(d) Install the height control clamp to the front pneumatic with shock absorber cylinder assembly.
5. CONNECT NO. 4 HEIGHT CONTROL TUBE
(a) Install the No. 4 height control tube and height control tube clamp to the front pneumatic with shock absorber cylinder assembly.
NOTICE:
Make sure to hold the front pneumatic with shock absorber cylinder chamber by hand.
(b) Tighten the lock nut.
Torque : 17 Nm (175 kgf-cm, 13 ft-lbf)
NOTICE:
Keep the chamber of the front pneumatic with shock absorber cylinder assembly unmoved by holding it by hand.
HINT
For the connecting procedure of the tube (Type 1), refer to Precaution of Suspension Control System See: Service
Precautions/Suspension Control System.
6. INSTALL FRONT STABILIZER LINK ASSEMBLY See: Front Shock Absorber/Installation
7. INSTALL FRONT SPEED SENSOR See: Front Shock Absorber/Installation
8. INSTALL FRONT WHEEL
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)
9. INSPECT FOR AIR LEAK