RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
NOTICE:
Do not twist the rear speed sensor when installing it.
3. CONNECT AIR TUBE (w/ Air Suspension)
(a) Install 2 new O-rings, a new plate and a new No. 2 connector, and then connect the air tube to the rear pneumatic cylinder assembly.
HINT
For the installing and connecting procedure of the tube (type 2), refer to Precaution of the suspension control system See: Service
Precautions/Suspension Control System.
4. INSTALL REAR WHEEL
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)
5. INSPECT FOR AIR LEAK (w/ Air Suspension)
(a) Inspect for air leaks See: Service Precautions/Suspension Control System.
6. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
(a) Inspect and adjust the rear wheel alignment See: Alignment/Service and Repair/Rear Wheel Alignment ( Service Manual ).