RX 450h AWD V6-35L (2GR-FXE) Hybrid (2011) - Rain Sensor Repair - Components
Rain Sensor: Service and Repair
Removal
WIPER / WASHER: RAIN SENSOR: REMOVAL
1. REMOVE RAIN SENSOR COVER
(a) Disengage the 2 claws and remove the rain sensor cover.
2. REMOVE RAIN SENSOR
(a) Disconnect the connector.
(b) Release the stopper by pulling it down.
Text in Illustration
(c) Remove the rain sensor as shown in the illustration.
3. CLEAN WINDSHIELD GLASS
NOTICE:
*
The rain sensor tape can be reused, however, replace it with a new one if it has dirt on it or it is damaged.
*
Check that the rain sensor tape does not remain on the windshield glass. If it does, remove it before installing the rain sensor.