RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Headlamp Washer Switch: Service and Repair
Installation
WIPER / WASHER: HEADLIGHT CLEANER SWITCH: INSTALLATION
1. INSTALL HEADLIGHT CLEANER SWITCH ASSEMBLY
(a) Engage the 2 claws to install the headlight cleaner switch assembly as shown in the illustration.
2. INSTALL NO. 1 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
3. INSTALL INSTRUMENT PANEL GARNISH LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
5. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
6. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
(a) Inspect the suspension control system See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Testing and
Inspection/Scan Tool Testing and Procedures/Test Mode Procedure.