RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Torque : 7.9 Nm (81 kgf-cm, 70 in-lbf)
(c) Connect the connector.
2. INSTALL REAR NO. 1 SPEAKER BRACKET
(a) Install the rear No. 1 speaker bracket with the 2 nuts.
Torque : 7.9 Nm (81 kgf-cm, 70 in-lbf)
3. INSTALL NO. 1 DECK BOARD REINFORCEMENT
(a) Install the No. 1 deck board reinforcement with the 3 bolts.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Installation
5. INSTALL RECLINING REMOTE CONTROL BEZEL LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
6. INSTALL ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
8. INSTALL REAR SEAT SIDE COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
9. INSTALL REAR FLOOR FINISH SIDE PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
10. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
11. INSTALL REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
12. INSTALL REAR SEAT ASSEMBLY LH
HINT
Refer to the procedure from Install Rear Seat Assembly LH See: Body and Frame/Seats/Service and Repair/Removal and