RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Hose/Removal
36. SEPARATE REAR FLEXIBLE HOSE LH
(a) Using a union nut wrench, disconnect the brake line from the rear flexible hose LH.
NOTICE:
*
Do not bend or damage the brake line.
*
Do not allow any foreign matter such as dirt and dust to enter the brake line.
(b) Remove the clip and separate the rear flexible hose LH.
(c) Remove the bolt and separate the rear flexible hose LH from the rear upper control arm assembly LH.
37. SEPARATE REAR FLEXIBLE HOSE RH
HINT
Perform the same procedure as the LH side.
38. REMOVE REAR STABILIZER LINK SUB-ASSEMBLY (for LH Side) See: Steering and Suspension/Suspension/Suspension Spring ( Coil /
Leaf )/Service and Repair/Removal
39. REMOVE REAR STABILIZER LINK SUB-ASSEMBLY (for RH Side)
HINT
Perform the same procedure as the LH side.
40. REMOVE NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR (w/ Active Stabilizer System) See: Bumper/Rear
Bumper/Service and Repair/Removal and Replacement/Removal
41. REMOVE REAR STABILIZER BAR (w/o Active Stabilizer System) See: Steering and Suspension/Suspension/Stabilizer Bar/Service and
Repair/Rear Stabilizer Bar/Removal
42. REMOVE REAR ACTIVE STABILIZER CONTROL ACTUATOR ASSEMBLY (w/ Active Stabilizer System) See: Steering and
Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Damping Control Actuator/Service and Repair/Rear Active Stabilizer
Control Actuator/Removal
43. REMOVE REAR PNEUMATIC CYLINDER ABSORBER ASSEMBLY LH (w/ Air Suspension) See: Steering and
Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Air Spring/Service and Repair/Removal
44. REMOVE REAR PNEUMATIC CYLINDER ABSORBER ASSEMBLY RH (w/ Air Suspension)
HINT
Perform the same procedure as the LH side.
45. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH
w/o Air Suspension: See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Rear Lower Arm/Removal
w/ Air Suspension: See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Rear Lower Arm/Removal
46. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
HINT