RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)
(d) Install the wire harness clamp bracket with the 2 bolts.
Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)
(e) Install the ECM with bracket with the 3 bolts.
Torque : 19 Nm (193 kgf-cm, 14 ft-lbf)
(f) Install the cooler pipe with the bolt.
Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)
(g) Connect the 2 ECM connectors and lower the 2 levers.
NOTICE:
*
When connecting the connectors, make sure that dirt, water or other foreign matter does not become stuck between the connectors
and other parts.
*
Make sure that the 2 levers are securely locked.
(h) Install the 2 wire harness clamps.