RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
Evaporative Emission Control Canister: Testing and Inspection
2GR-FXE EMISSION CONTROL: CANISTER: INSPECTION
1. INSPECT CHARCOAL CANISTER ASSEMBLY
(a) Visually check the charcoal canister assembly.
(1) Visually check the charcoal canister for cracks or damage.
(1) If cracks or damage is found, replace the charcoal canister assembly.
(b) Check canister operation.
(1) With the purge port closed, blow 5 kPa (0.1 kgf/cm2, 0.7 psi) of air into the vent port, and check that air flows from the air inlet port.
Text in Illustration
(1) If the result is not as specified, replace the charcoal canister assembly.
(2) With the vent port closed, blow 5 kPa (0.1 kgf/cm2, 0.7 psi) of air into the air inlet port, and check that air flows from the purge port.
Text in Illustration
(2) If the result is not as specified, replace the charcoal canister assembly.
(c) Check for air leaks.
(1) Connect a pressure gauge to the vent port of the charcoal canister.