RX 450h FWD V6-3.5L (2GR-FXE) Hybrid (2010)
(d) Install the ground wire to the active stabilizer ECU bracket with the bolt.
Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)
3. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR See: Body and Frame/Bumper/Rear Bumper/Service and
Repair/Removal and Replacement/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
5. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
6. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.