SC 300 L6-3.0L (2JZ-GE) (1992)
(c) Measure the protrusion of the push rod from housing end.
Protrusion: 7.7 - 10.5 mm (0.303 - 0.413 in.)
If the protrusion is not as specified, replace the tensioner.
(c) Measure the protrusion of the push rod from housing end.
Protrusion: 7.7 - 10.5 mm (0.303 - 0.413 in.)
If the protrusion is not as specified, replace the tensioner.