SC 300 L6-3.0L (2JZ-GE) (1992)
/Page-303005.png)
(b) Install the timing belt, checking the tension between the crankshaft timing pulley and exhaust camshaft timing pulley.
10. Set timing belt tensioner.
(a) Using a press, slowly press in the push rod using 981-9,807N (100-1,000 kgf, 220 - 2,205 lb) of pressure.
(b) Align the holes of the push rod and housing, pass a 1.50 mm hexagon wrench through the holes to keep the push rod retracted.
(c) Release the press.
(d) Install the dust boot onto the tensioner.
11. Install timing belt tensioner.
(a) Temporarily install the tensioner with the two bolts.
(b) Alternately tighten the two bolts.
Torque: 26 Nm (270 kgf-cm 20 ft-lb)
