SC 300 L6-3.0L (2JZ-GE) (1992)
a. Remove two clips using the clip remover then remove the undercover.
NOTE:
Pull down the dip areas (4 places) of the Undercover to remove.
b. Remove the (2) wing nuts and the plate on the bottom of the cooling unit.
CAUTION:
The plate and wing nuts will be reused.
c. Remove the (2) filters from the cooling unit.
2. Clean the Evaporator.
-
Follow the general procedures.
NOTE:
Location for insertion of spray nozzle is indicated by the red arrow in the illustration.