SC 300 L6-3.0L (2JZ-GE) (1992)
/Page-197006.png)
(c) Remove the 1.50 mm hexagon wrench from the tensioner with pliers.
12. Check valve timing.
(a) Turn the crankshaft pulley two revolutions from TDC to TDC.
NOTICE: Always turn the crankshaft clockwise.
(b) Check that each pulley aligns with the timing marks as shown in the figure
If the marks do not align, remove the timing belt and reinstall it.
13. Install drive belt tensioner.
Install the tensioner with the three bolts.
Torque: 21 Nm (210 kgf-cm, 15 ft-lb)
NOTICE: Be careful not to drop the bolts inside the timing belt cover.
