SC 300 L6-3.0L (2JZ-GE) (1992)
Oxygen Sensor: Technical Service Bulletins
Engine Controls - Bank 1/Bank 2 O2 Sensor Identification
ENGINE
EG015-07
Title:
ENGINE BANK 1 AND BANK 2 A/F AND
02 IDENTIFICATION
Models:
'90 -'08 Applicable Models
June 28, 2007
TSIB UPDATE NOTICE:
The information contained in this TSIB supercedes TSIB No. EG010-04. TSIB No. EG010-04 is now obsolete and should be discarded.
Introduction
This service bulletin provides information on the proper identification of engine bank 1 and engine bank 2 for correct A/F sensor and oxygen sensor
replacement.
This bulletin contains information that identifies engine bank 1 and engine bank 2 on the following engines: 2GR-FE, 2GR-FSE, 4GR-FSE, 2JZ-GE,
1MZ-FE, 3MZ-FE, 1UR-FSE, 3UR-FE, 1UZ-FE, 2UZ-FE, and 3UZ-FE.
^
Bank 1 (B1) refers to the bank that includes cylinder No. 1.
^
Bank 2 (B2) refers to the bank opposite bank 1.
^
Sensor 1 (S1) refers to the sensor that is located before the catalytic converters.
^
Sensor 2 (S2) refers to the sensor that is located after the catalytic converters.
Warranty Information