SC 300 L6-3.0L (2JZ-GE) (1992)
Canister Purge Solenoid: Testing and Inspection
VSV Inspection - Checking Resistance
- Connect ohmmeter across VSV terminals.
Resistance 33 - 34 ohms
VSV Inspection - Checking For Short
- Check that there is no continuity between either terminal and VSV case.
VSV Inspection - Checking Operation
- Blow air into port E. Air should flow from port F with high resistance.
VSV Inspection - Checking Operation
- Apply battery voltage across solenoid terminals.
- Blow air into port E. Air should flow from port F easily.
- If any step failed to produce desired results, replace VSV.