SC 300 L6-3.0L (2JZ-GE) (1992)
Evaporative Emission Control Canister: Testing and Inspection
Canister Inspection
Preliminary Inspection
- Remove canister from vehicle
- Visually inspect for cracks or damage.
Canister Inspection
Check Valve Inspection
- Blow low pressure air into port A.
- Air should flow freely out other ports.
Canister Inspection]
- Blow into port B.
- No air flow should be present.
Canister Inspection
Filter Cleaning
- Blow compressed air, (Below 43psi, 294 kPa), through port A while blocking port B.
- Air should flow out lower port.