SC 300 L6-3.0L (2JZ-GE) (1992)
/Page-117001.png)
Vehicle Speed Sensor: Service and Repair
O/D Direct Clutch Speed Sensor, Replace
1.
Raise and support vehicle.
2.
Remove front exhaust pipe and left side catalytic convertor.
3.
Remove left side heat insulators.
4.
Disconnect speed sensor electrical connector.
5.
Remove speed sensor attaching bolt, then remove speed sensor and O-ring.
6.
Reverse procedure to install. Torque speed sensor attaching bolt to 48 inch lbs.
