SC 400 V8-4.0L (1UZ-FE) (1997)
EFI Main Relay: Testing and Inspection
EFI MAIN RELAY (Marking: EFI MAIN) INSPECTION
1. REMOVE EFI MAIN RELAY
2. INSPECT EFI MAIN RELAY
A. Inspect relay continuity
(a) Using an ohmmeter, check that there is continuity between terminals 1 and 3.
If there is no continuity, replace the relay.
(b) Check that there is no continuity between terminals 2 and 4.
If there is continuity, replace the relay.
B. inspect relay operation
(a) Apply battery voltage across terminals 1 and 3.
(b) Using an ohmmeter, check that there is continuity between terminals 2 and 4. If there is no continuity, replace the relay.
3. REINSTALL EFI MAIN RELAY