Mark LT 2WD V8-5.4L (2008)
from the seat cushion foam pad.
Separate the hook-and-loop strips.
12. Remove the hog rings and 60 percent cushion trim cover.
40 percent seat
13. Remove the 40 percent support riser bolt.
-
To install, tighten to 33 Nm (24 lb-ft).
14. Remove the 40 percent support riser pivot bolt, bushing and right support riser.
-
To install, tighten to 33 Nm (24 lb-ft).
15. Remove the 40 percent seat cushion latch handle screw and handle.
16. Remove the 40 percent seat cushion latch cover screw and cover.
17. Remove the 40 percent seat cushion latch bolt and latch.
-
To install, tighten to 26 Nm (19 lb-ft).
18. CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat cushion foam pad.
Separate the hook-and-loop strips.
19. Remove the hog rings and 40 percent cushion trim cover.