MKZ AWD V6-3.5L (2008)
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may
result in major service expense. New parts must be installed with the same part numbers or equivalent part, if replacement is necessary. Do
not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of
correct retention of these parts.
1. Remove the wheel and tire.
2. If equipped, remove the wheel speed sensor bolt.
3. If equipped, remove the wheel speed sensor harness bolt and position the wheel speed sensor aside.
4. NOTE: Apply the brake to keep the halfshaft from rotating.
Remove and discard the halfshaft nut.
5. CAUTION: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the bolts and position the caliper and anchor plate assembly aside.
