Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Front Door Exterior Handle: Service and Repair
EXTERIOR FRONT DOOR HANDLE
Removal and Installation
NOTE: The front door window glass must be completely raised.
1. Remove the front door trim panel.
2. Position the watershield aside.
3. Remove the exterior front door handle.
1
Disconnect the exterior door handle actuating rod.
2
If equipped, disconnect the door lock cylinder rod.
3
Remove the 2 nuts.
4
Push the exterior door handle out from the bottom surface of the handle.
4. NOTE: Make sure the door handle and the front door handle rod is in a relaxed position and that the front door handle rod is all the way up
before closing the clips.
To install, reverse the removal procedure.
