Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Front Door Interior Handle: Service and Repair
INTERIOR DOOR HANDLE - REAR
Removal and Installation
1. Remove the front or rear door trim panel.
2. Remove the door handle insulator.
3. Position the watershield aside.
4. Remove the interior door handle.
1
Release the door handle cable from the door carrier.
2
Release the door carrier retaining clip.
3
Position aside the interior door handle.
5. Release the cable from the handle.
6. NOTE: Make sure the interior door handle spring has been realigned before installation of the door handle. Check for normal operation.
To install, reverse the removal procedure.