Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch Remote Control
LIFTGATE LATCH REMOTE CONTROL
Removal and Installation
1. Remove the liftgate trim panel.
2. Position the watershield aside.
3. CAUTION: Be careful not to kink the liftgate latch control cable while disconnecting it from the latch.
Disconnect the liftgate latch.
1
Release the actuating rod.
2
Disconnect the liftgate latch control cable.
4. Remove bolts and position the liftgate remote control aside.