Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Trim Panel: Service and Repair
C-Pillar Trim Panel
C-PILLAR TRIM PANEL
Removal and Installation
NOTE: Right side shown, left side similar.
1. NOTE:
-
Position the safety belt guide to the lowest position.
-
Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or cover does not remain closed,
install a new shoulder safety belt guide cover.
Remove the safety belt guide.
-
Lift up on the cover and remove the nut.
2. Remove the C-pillar trim panel.
-
Remove the bolt cover and bolt and pull outward to release the retainers.
3. To install, reverse the removal procedure.