Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Shift Interlock Cable: Service and Repair
Selector Lever Cable and Bracket - Column Shift
Selector Lever Cable and Bracket - Column Shift
Removal and Installation
1. Remove the instrument panel lower finish panel.
2. NOTE: To prevent cable damage, do not apply force to the transmission shift cable assembly between the steering column transmission selector
lever arm and the steering column bracket.
Disconnect the transmission shift cable from the steering column.
^
Disconnect the transmission shift cable from the transmission selector lever arm and support.
^
Carefully lift the two locking tabs and disconnect the transmission shift cable from the steering column bracket.
3. Remove the cable retaining screw.
4. Push the rubber grommet and transmission shift cable through the floor panel.
5. With the vehicle in NEUTRAL, position it on a hoist.