Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
6. NOTE: To prevent shift cable damage, do not apply force to the transmission shift cable between the manual control lever and the transmission
shift cable bracket.
Disconnect the transmission shift cable from the manual control lever.
7. Carefully pry behind the transmission shift cable lock tab to release the transmission shift cable from the bracket.
8. Remove the shift cable bracket from the transmission.
^
Remove the bolts.
^
To install, tighten to 25 Nm (18 ft. lbs.).
^
Remove the bracket.
9. Remove the cable from the cable route assist clip located at the transmission bell housing.
10. To install, reverse the removal procedure.
CAUTION: Make sure the cable is inserted into the cable route assist clip. Failure to do so can result in exhaust contact.
