Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
2. With the vehicle idling (600 - 750 rpm) in PARK, position it on a hoist.
3. Remove the fluid fill plug located on the RH rear side of the case near the transmission electrical connector.
4. CAUTION: The use of any other transmission fluid can result in the transmission failing to operate in a normal manner or transmission failure.
Fill the transmission.
^
Add clean automatic transmission fluid to the transmission through the fluid fill hole. Stop when the fluid runs out of the bottom of the hole.
5. Install the fluid fill plug.
6. Move the transmission range selector lever through all the gear ranges, checking for engagements.
7. If more fluid is needed, start the engine. Remove the fluid fill plug on the side of the case, fill with clean automatic transmission fluid until fluid
just starts to dribble out of the hole and reinstall the fill plug.
Transmission Fluid Cooler Leaks at Radiator
Auxiliary Transmission Fluid Cooler - 6HP26
