Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
4. Remove the push pin retainers and remove the air deflector.
5. Remove the three bolts and remove the auxiliary transmission fluid cooler.
Installation
1. Install the auxiliary transmission fluid cooler and install the three bolts.
2. Position the air deflector and install the push pin retainers.
3. Connect the fluid cooler tubes into the auxiliary transmission fluid cooler.
4. With the vehicle idling (600 - 750 rpm) in PARK, and the transmission temperature at 30°C - 50°C (86°F - 122°F), check and adjust the
transmission fluid level.