Navigator 4WD V8-5.4L SOHC VIN L (1998)
Torque Converter: Service and Repair
Flushing
NOTE: MERCON Automatic Transmission Fluid is being replaced by MERCON V as a service fluid.
1. CAUTION: Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.
Following the instructions included with the Torque Converter/Transmission Oil Cooler Cleaner, flush the torque converter.
2. After flushing, drain the remainder of the solvent through the converter drain plug.
3. Add 1.9 liter (2 qt.) of clean MERCON or MERCON V Automatic Transmission Fluid or equivalent meeting FORD specification fluid into the
converter fluid filler tube and agitate by hand.
4. Thoroughly drain the solution.
