Town Car V8-4.6L (2008)
11. WARNING: Do not drive vehicle until the urethane adhesive seal has cured. Follow urethane adhesive manufacturer's curing directions.
Inadequate or incorrect curing of the urethane adhesive seal will adversely affect glass retention. Failure to follow these instructions may
result in serious injury to vehicle occupant(s).
CAUTION: Before positioning the windshield glass, open vehicle windows to prevent the air pressure of closing doors from affecting the
adhesive bond.
Install the windshield glass aligning it to the marks made previously.
12. NOTE: The urethane adhesive must cure for a minimum of one hour before testing for air or water leaks.
After the urethane cures, check the windshield glass seal for air or water leaks through the urethane adhesive bead and add urethane adhesive as
necessary.
13. Position the front portion of the headliner.
14. Install the sun visors and sun visor clips.
15. Install the LH and RH A-pillar trim panels.
16. Install the front door weatherstrips.
17. Install the instrument panel defroster opening grille.
-
Connect the electrical connectors.
18. Install the interior rear view mirror.
19. Install the cowl panel grille.