3 L4-2.0L (2007)
Rear Door Exterior Handle: Service and Repair
REAR OUTER HANDLE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (Vehicles with power window system)
2. Fully roll up the rear door glass.
3. Remove the sail garnish. (5 door)
4. Remove the regulator handle. (Vehicles with manual window system)
5. Remove the rear door trim.
6. Remove the hole cover.
7. Remove the hole plug.
8. Remove the bolt.
9. Remove the nut, then remove the pad.
10. Remove the bolt.
11. Detach the rod from the outer handle.
12. Secure the rear part of the rear outer handle and, with the rear outer handle lever pulled outward (1), remove the rear part of the rear outer handle
from the rear door.
13. Install in the reverse order of removal.