3 L4-2.0L (2007)
2. Install the SST using the following procedure.
Caution: Refer to the SST instruction manual for the basic handing procedure.
(1) Install the right rear shaft of the SST to the bolt of the right shock absorber as shown in the figure.
(2) Install the left rear shaft of the SST to the bolt of the left shock absorber. (identical position to the right side)
(3) Install front foot No.2 to the left/right front shaft of the SST, then align the groove of the front shaft of the SST with the folded up part of the
vehicle as shown in the figure.
(4) Adjust the positions of the SST side bars so that they are the same height (left and right) and horizontal.
(5) Make sure each joint is securely tightened.
3. Suspend the engine using the SST.