3 L4-2.0L (2007)
Keyless Entry Module: Component Tests and General Diagnostics
KEYLESS CONTROL MODULE INSPECTION
1. Measure the voltage or inspect for continuity according to the Terminal Voltage Table (Reference).
-
If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item (s)" and related wiring
harnesses.
2. If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, perform symptom
troubleshooting [KEYLESS ENTRY SYSTEM]. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Testing
and Inspection/Symptom Related Diagnostic Procedures/Symptom Troubleshooting Chart