3 L4-2.3L (2004)
Rear Door Interior Handle: Service and Repair
INNER HANDLE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (Vehicles with power window system or power outer mirror)
2. Remove the inner garnish, (front)
3. Remove the regulator handle. (Vehicles with manual window system)
4. Remove the front door trim or rear door trim.
5. Using a flathead screwdriver, press and hold the tab in the direction indicated by arrow (1) and remove the shaft by pulling it in the direction
indicated by arrow (2).
6. Pull off the inner handle, and remove the door lock knob cable and inner handle cable.
7. Install in the reverse order of removal.
