3 L4-2.5L (2010)
Antenna - Keyless Entry: Service and Repair
Keyless Antenna Removal/Installation
KEYLESS ANTENNA REMOVAL/INSTALLATION
Vehicle Interior, Front
Applied VIN (assumed):
-
JM1 BL1S6*A# 100001-180029
-
JM1 BL1H3*A# 100001-180029
-
JM1 BL1H4*A# 100001-180029
-
JM1 BL1H6*A# 100001-180029
-
JM1 BL1S5*A# 100001-180029
-
JM1 BL1H5*A# 100001-180029
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Passenger-side front scuff plate See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate
Removal/Installation
b. Passenger-side front side trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Front Side Trim
Removal/Installation
c. Grove compartment See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair
d. Passenger-side lower panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Lower Panel Removal/Installation
3. Remove the fastener.
4. Disconnect the connector.
5. Remove the keyless antenna.
6. Install in the reverse order of removal.
Vehicle Interior, Center
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Upper panel See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Upper Panel Removal/Installation
b. Shift knob (MTX) See: Transmission and Drivetrain/Manual Transmission/Transaxle/Shifter M/T/Service and Repair
c. Selector lever knob (ATX) See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Automatic
Transaxle Shift Mechanism Removal/Installation