3 L4-2.5L (2010)
Vehicle Exterior, Rear
1. Disconnect the negative battery cable.
2. Remove the rear combination light. (See See: Lighting and Horns/Tail Lamp/Service and Repair/Rear Combination Light Removal/Installation)
3. Remove the rear bumper. See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal and Replacement
4. Remove the nuts.
5. Disconnect the connector.
6. Remove the keyless antenna.
7. Install in the reverse order of removal.
Vehicle Exterior, Driver's Door/Passenger's Door
NOTE:
-
The keyless antenna (vehicle exterior, driver's door/passenger's door) is built into the front outer handle. See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Handle/Front Door Exterior Handle/Service and Repair