3 L4-2.5L (2010)
NOTE:
If there is no corrosion on the connector terminal, refer to MS3 online or Workshop Manual (section 09-03 NO. 2 ADVANCED KEYLESS ENTRY
FUNCTION INOPERATIVE [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]).
4. Replace the outer handle and the short cord (A).
^ View after door panel removal.
5. Check the connector's lot number (A) on new outer handle.
NOTE:
^ Apply the protector if connector lot number is 0E14 or before.
^ Proceed to step 7 if connector lot number is 0E15 or later.