3 L4-2.5L (2010)
1. Verify customer concern.
2. Adjust the alignment of the troubled front door glass. Refer to MS3 online instructions or Workshop manual section 09-12 FRONT DOOR GLASS
REMOVAL/INSTALLATION.
a. To access the glass installation bolt, position the front door glass so that the distance from the top of the front door glass to the upper part of the
front beltline is approximately 80 mm.
b. Disconnect the negative battery cable.
c. Remove the inner garnish.
d. Remove the front door trim.
e. Remove the front door speaker.
f. Remove the hole plugs.
g. Loosen the 2 bolts behind the hole plugs.
h. Align the glass along the door sash.
1. Push the front door glass backwards to align the glass along the door sash.
2. While holding the door glass backwards, tighten the two bolts.
3. Install in the reverse order of removal.
4. Verify repair.
