3 L4-2.5L (2010)
10. Carefully apply glue to the dashboard assembly where the cracked panel was fitted - see "Applying the Glue" procedure later in this document.
Glue application location on the dashboard shown with darker lines (or reference removed panel)
NOTE:
^ The bead of glue should be 3-4 mm.
^ Follow the directions/handling instructions on the label of the glue.
^ Be sure to thoroughly degrease the surface where the glue will be applied with rubbing alcohol.
^ For strong adhesion, be generous with the amount of glue.
^ Be sure to install the new panel within 10 minutes after the glue is applied, otherwise the glue will dry and lose adhesion.
