3 L4-2.5L (2010)
Splash Guard: Service and Repair
Aerodynamic Under Cover No.1 Removal/Installation
AERODYNAMIC UNDER COVER NO.1 REMOVAL/INSTALLATION
1. Remove the aerodynamic under cover No.2. (See See: Aerodynamic Under Cover No.2 Removal/Installation)
2. Remove the bolts.
3. Remove the aerodynamic under cover No.1 in the direction of the arrow shown in the figure.
CAUTION:
-
Be careful not to damage the aerodynamic under cover No.1 during removal.
4. Install in the reverse order of removal.