3 L4-2.5L (2010)
Drive Belt: Testing and Inspection
DRIVE BELT INSPECTION [LF, L5]
LF
A/C drive belt
NOTE:
-
Drive belt deflection/tension inspection is not necessary because of the use of the maintenance-free type A/C drive belt.
-
Replace the drive belt if it is found to be damaged during visual inspection, or if there is a malfunction or noise in the A/C compressor. See:
Service and Repair
Generator drive belt
NOTE:
-
Drive belt deflection/tension inspection is not necessary because of the use of the drive belt auto tensioner.
1. Verify that the drive belt auto tensioner indicator mark does not exceed the limit.
-
If it exceeds the limit, replace the drive belt. See: Service and Repair
L5
NOTE:
-
Drive belt deflection/tension inspection is not necessary because of the use of the drive belt auto tensioner.
1. Verify that the drive belt auto tensioner indicator mark does not exceed the limit.