3 L4-2.5L (2010)
Front Oil Seal Removal Note
1. Cut the oil seal lip using a utility knife.
2. Remove the oil seal using a screwdriver wrapped with a rag.
Front Oil Seal Installation Note
1. Apply clean engine oil to the oil seal lip.
2. Push the oil seal slightly in by hand.
3. Tap the oil seal in evenly using the SST and a hammer.
Front oil seal press-in amount
-
0-0.5 mm {0-0.019 in}
Crankshaft Pulley Lock Bolt Installation Note
1. Install the SST on the camshaft as shown in the figure.
